Tips For Replacing a Window Handle
It is easy to replace your window handle in the at-home comforts of your home. Follow these handy tips for a smooth operation and great look.
Remove the screw covers from your uPVC handle to expose the screws. Then, measure the length of the spindle to ensure that you receive the right size replacement.
1. Determine the Spindle Length
It is crucial to get the spindle size right when replacing windows handles. It can affect the tightness or looseness of the handle and whether the handle will lock properly into the frame of the window. The spindle is the steel shaft that connects to the handle and to the lock within the frame of the window. The spindle can be either a standard 8mm cross-section in the industry or the earlier 9mm versions. Modern industry standards are 8mm, however it wasn't always the case. It is crucial to verify the measurements prior to purchasing the handle you want to purchase.
The easiest method of measuring the spindle length is to remove the handle that is currently in place This can be accomplished by turning it into the open position and unscrewing the two screws (which may be hidden behind plastic caps that will have to be removed) that hold the handle. Once removed take a measurement from the base of the handle until the end of the spindle. This will give you the measurement required to purchase a replacement.
There are a variety of options when you are looking to pick the perfect window handle. From sleek chrome that fits in with a modern style, to traditional burnished bronze that looks beautiful in restored Georgian rooms, or the more classic Tudor cottages with curled mongoose tail latches. There are many options to choose from, but the most important thing is to select one that complements your home's style.
Espag handles are typically installed to uPVC window frames and are always the same size with a 43mm center. Cockspur handles vary from 58mm to 62mm but luckily there are replacements available for both sizes. Cadenza window handles are a different size again as they have an angled blade which operates a multi-point locking mechanism inside the window.
When choosing a window handle, you should also consider the hand you use to open your door. Inline espag window handles are not hand-operated and can be used on right or left handed windows. Cranked window handles are hand-operated and are only used on windows that open in only one direction.
2. Take the handle off
The handle may be damaged or just worn out the handle of a window that falls off can be very frustrating. The good news is that you can replace the uPVC handle yourself. You only need some basic hand tools and some time to complete the process.
First, you need to open the window and make sure that it's in an unlocked position. Then, take off the screws that hold the handle in position. Once the screw caps have been removed you will be able remove the handle.
The handle is connected to a spindle inside the window frame. It is fixed with either a screw or pin, depending on the type of handle. The most popular types of handles are inline Espagnolette handles and the cockspur handles. Both of these types of handles are employed on casement windows, including aluminum windows. They can be locked by using a key to prevent unauthorised opening of the window from outside, or you can lock them by turning the handle clockwise.
To take the handle off, you will require a flat-bladed screwdriver. When this clip is released the handle will fall off the spindle. Once the old handle is removed, you'll be required to measure the length of the spindle in order to make sure that the new handle is compatible with this measurement.
Once you have decided on the correct size for the handle, screw it into the correct position. You must make sure that the new handle is firmly fixed and is turning in the correct way (clockwise for open or counterclockwise for closed). It is essential to make sure that the handle has not been installed upside down.
In the end, you must replace the screw cover caps. After you've done that, you can test the handle to confirm that it functions correctly. It is also recommended to test the locking mechanism by moving the handle from the locked position, and then back again.
3. Take the Screws off
A uPVC window handle is a crucial component of every home and is often the first item to show signs of wear and wear or damage. This could be due natural elements, regular use, or even damage caused by criminals looking to gain access to your home. However, repairmywindowsanddoors can easily solve the problem and prevent the issue from happening again.
UPVC handles can also be difficult to remove when the locking mechanisms aren't functioning correctly. Most of the time, the issue is solved by replacing the multipoint lock instead of the entire handle and it's certainly worth checking this as it can save you money.
After you've removed the old handle, you will need to take off the screws that secured it. These screws are usually found on the inside of the handle base. You may need to use an screwdriver to do this, and it's important that you don't over tighten, as this could cause the handle to become loose.
Then, you'll need to find the screws or pins that hold the handle in place. They're usually on the inside of the base of the handle. You'll require an instrument to remove them. If you wish to replace them, you should replace the screw caps and check the handle to ensure it is working properly.
If you're ready to put in the new handle, simply line up the spindle with the cut out in the window mechanism and screw it into the appropriate position. Make sure the handle is in an open position and that any screws are tightly fixed before replacing the screw covers in the event that you want to do this. After this is done, you're done and can enjoy your newly replaced window handle. Hopefully this will help you avoid the need for expensive window and door replacement services in the future. If you'd like to get more assistance with this or any other aspect of your uPVC windows, don't hesitate to contact us.
4. Install the new handle
The process of replacing a broken window handle or updating it is simple and can be completed within a few easy steps. The key is to identify the kind of handle, take measurements of its spindle and identify the tools you'll require to complete the job. Always ensure security when working with windows and tools. It's also important to take your time and follow the steps to ensure you have a working handle that is safe to use.
To begin, find the screws that hold the window handle in place. Remove them while firmly gripping the handle to stop it from falling and causing an injury. After the screws have been removed, you can place them in a safe location to be replaced later.
Once the old handle has been removed, you can begin to install your new handle. The handle must be fitted perfectly for it to function properly and keep the window in its closed position. Then move the metal bar that is square on the handle into the hole for the window mechanism.
The last step is to replace the caps on the screws and test the handle to ensure that it is working. If you aren't satisfied with the results or if your window does not open and close properly Contact our experts for assistance.
The majority of homes in the UK have uPVC windows. As they are, a lot of them will require to be replaced in the near future due to wear or breakage. Anyone with a little DIY knowledge can accomplish the task. The most important aspect in the success of the procedure is to ensure that you're using a handle that is compatible with your existing window in terms of size and design. Contact our team if you are unsure of the type of handle that you need. They'll be able to guide you through the possibilities.